Quiz For Industrial Safety Eyewear Part 2

Quiz Summary

0 of 20 Questions completed

Questions:

You have already completed the quiz before. Hence you can not start it again.

Quiz is loading…

You must sign in or sign up to start the quiz.

You must first complete the following:

Results

Quiz complete. Results are being recorded.

Results

0 of 20 Questions answered correctly

You have reached 0 of 0 point(s), (0)

Current
Review
Answered
Correct
Incorrect

Question 1 of 20

1. Question
Poorly fitting eye and face protection will _________________
- be tolerated on a long term basis
- fail to offer the necessary protection
- respond favorably to the use of masking tape
- take getting used to on the part of the patient
Question 2 of 20

2. Question
How should devices with adjustable features be fitted
- on a standard mannequin
- on an average
- on an individual basis
- only with a metric ruler
Question 3 of 20

3. Question
When fitting PPE, consideration should be given to ______________
- employer’s ability to pay
- patient’s preference of colors
- comfort and fit
- how the PPE device fit the last employee
Question 4 of 20

4. Question
Equipment with optical defects _____________________
- can be used on a temporary basis while a new PPE is being purchased
- are only to be used by the original owner
- can be put back into inventory
- is prohibited for use
Question 5 of 20

5. Question
Eye or face protection that is to be issued to another employee should ________
- never be used
- be disinfected
- be discouraged
- re-engraved with the new employee initials
Question 6 of 20

6. Question
According to this course, what is the most effective method of disinfection of PPE
- boil the equipment
- wipe the equipment lightly with alcohol
- use hot water only
- disassemble the goggles or spectacles and thoroughly clean all parts with soap and water
Question 7 of 20

7. Question
Workers who wear prescription glasses _________________
- do not need any additional eye protection
- must also wear required eye protection
- should not be employed in a job requiring PPE
- should be reimbursed for their prescription glasses
Question 8 of 20

8. Question
What can present additional hazards to contact lens wearers
- dust and chemicals
- high speed fan on at all times
- location near a bright window
- overhead lighting
Question 9 of 20

9. Question
What is true regarding employee-owned equipment
- no one at the job has a right to inspect it
- employees cannot own their own equipment
- the employer is responsible for adequacy of such equipment
- the employer is not responsible for proper maintenance of the equipment
Question 10 of 20

10. Question
What should be of safe design and construction for the work to be performed
- goggles only
- helmets only
- all personal protective equipment
- there is no set safe design
Question 11 of 20

11. Question
Who performs a hazard assessment
- the employee using the equipment
- the employer
- a special OSHA inspector
- a visiting dignitary
Question 12 of 20

12. Question
What is not true about PPE training
- PPE training is provided by the employer
- PPE training is provided to one employee who will then pass on the
- PPE training shall teach when PPE is necessary
- PPE training will teach the limitations of the equipment
Question 13 of 20

13. Question
What is required if a previously trained employee does not have the skill required by OSHA paragraph (f)2
- the employee must be discharged
- the employee must be transferred to another department
- the employer shall retrain each such employee
- the employer has no responsibility in this situation
Question 14 of 20

14. Question
Which of these situations is not of OSHA concern for the use of PPE
- the use of chemicals
- exposure to molten metal
- exposure to light radiation
- exposure to sunlight
Question 15 of 20

15. Question
Are written elements important for a PPE program
- no, the program should only use practical demonstration
- no, the program is fully funded by ANSI
- yes, the program required a number of written elements
- yes, the program mandates a written agreement by every employee
Question 16 of 20

16. Question
What is not an option for a worker who wears prescription eyeglasses
- goggles that incorporate corrected lenses mounted behind protective lenses
- the use of the patient’s own eyeglasses alone
- goggles that fit comfortably over the corrective eyeglasses
- goggles that do not disturb the alignment of the glasses
Question 17 of 20

17. Question
Can a face shield alone provide adequate protection
- a face shield alone does not protect the employee from impact hazards
- a singular face shield is adequate
- only a mesh face shield can be used alone
- there are no face shields available without integrated eyewear
Question 18 of 20

18. Question
Which of the following is not necessary on the label of a goggle intended for use with laser beams
- the laser wavelengths for which they are intended to be used
- the maximum amount of time the eyewear is to be used
- the optical density of the wavelengths
- the visible light transmissions
Question 19 of 20

19. Question
What is the definition of optical density
- the amount of light exiting a substance
- the central thickness of any lens
- the logarithmic expression of attenuation
- light set at 760 nm
Question 20 of 20

20. Question
What is the device attached to the front of the frame designed to provide angular protection from impact hazards
- a secondary protector
- a face shield
- a side shield
- a primary protector

Quiz For Industrial Safety Eyewear Part 2

Quiz Summary

Information

Results

Results

Categories

1. Question

2. Question

3. Question

4. Question

5. Question

6. Question

7. Question

8. Question

9. Question

10. Question

11. Question

12. Question

13. Question

14. Question

15. Question

16. Question

17. Question

18. Question

19. Question

20. Question