0 of 45 Questions completed
Questions:
You have already completed the quiz before. Hence you can not start it again.
Quiz is loading…
You must sign in or sign up to start the quiz.
You must first complete the following:
0 of 45 Questions answered correctly
Your time:
Time has elapsed
You have reached 0 of 0 point(s), (0)
Earned Point(s): 0 of 0, (0)
0 Essay(s) Pending (Possible Point(s): 0)
The Occupational Safety and Health Administration (OSHA) is a federal agency operating under the auspices of
The mission of OSHA is to
Every day an estimated ______________ eye injuries occur in the American Workplace
Eye injuries can be caused by
1 flying objects
2 contact with chemicals
3 not wearing appropriate eye protection
4 objects swinging from a fixed or attached position
Eye injuries can be prevented by
1. wearing effective eye protection
2. better training and education
3. proper maintenance
Information on eye safety is available by contacting
1. The American National Standards Institute (ANSI)
2. OSHA
3. The National Society to Prevent Blindness
4. The Federal Trade Commission (FTC)
It is estimated that _____________percent of eye injuries can be prevented through the use of proper protective eyewear.
When verifying that a required workplace hazard assessment has been performed, a written certification identifies:
Chipping, grinding, machining, masonry work, wood working, sawing, drilling, chiseling present potential_______________hazards.
Furnace operations, pouring, casting, and welding present potential_________________hazards.
Welding, torch-cutting, brazing, soldering, and laser work present potential________________hazards.
The majority of impact injuries result from:
________________are secondary protectors intended to shield the eyes from a variety of impact hazards.
_____________are primary protective devices intended to fit the face to protect against impact hazards.
To adequately protect workers’ eyes form impact hazards safety spectacles should always:
_____________________may utilize removable side shields and may be plastic or wire screen
___________________surround the eyes and form a protective seal around the eyes preventing objects from entering from the side our underneath.
___________________may be worn over corrective spectacles without disturbing the adjustment of the spectacles.
________________________________resists direct passage of large particles into the goggle. Prevents fogging by allowing air circulation.
_______________________________prevents fogging by allowing air circulation while it protects against liquid or chemical splash entry.
___________________________________provide eye protection for performing tasks involving intense light. Are available with removable lenses and may incorporate prescription lenses
When worn alone _________________________do not protect employees from impact hazards
__________________feature both removable and lift front designs and protect against light impact.
_____________________may include a plastic or glass insert and protect against some moderate impact.
________________________are primary protectors intended to shield the eyes from a variety of heat hazards.
______________________are secondary protectors intended to protect the entire face, in addition to the eyes, from certain heat hazards.
________________are primary protectors intended to shield the eyes against liquid or chemical splash, irritating mists, vapors and fumes
_________________are secondary protectors intended to protect the entire face against exposure to chemical hazards.
__________________are primary protective devices intended to protect the eyes against a variety of airborne particles and harmful dust.
Wearing eye protection with the correct filter shade number protects workers’ eyes from:
The intensity of visible light and radiant energy produced by welding operations varies with:
________________are secondary protectors intended to shield the eyes and face from optical radiation, heat and impact.
________________may include easily removable filter and cover plates which are available in many filter shades.
_______________includes an adjustable feature which allows the user to lift the window and may include easily removable filter and cover plates
________________use filter lenses to protect the eyes from optical radiation and include and adjustable strap. They do not provide face protection.
The selection of laser protection should depend upon:
When training employees who are required to use PPE in the workplace each employee shall be trained to know at least the following:
Circumstances where retraining in the use of PPE is required when:
Eye and face protection must comply with the standards established by:
The scope and purpose of the ANSI Z-87.1 1989 is:
According to the ANSI Z-87.1 1989 standards the lens thickness of lenses made to individual prescriptions:
According to the ANSI Z-87.1 1989 standards each lens shall be distinctly marked in permanent and legible manner with:
According to the ANSI Z-87.1 1989 standards:
Employees who wear prescription lenses or contacts:
According to the ANSI Z-87.1 1989 standards prescription lenses must be tested using one of the two following
1. the drop ball test
2. the penetration test
3. the high mass impact test
4. the high velocity impact test