Quiz For Industrial Safety Eyewear Part 1

The Occupational Safety and Health Administration (OSHA) is a federal agency operating under the auspices of

The mission of OSHA is to

Every day an estimated ______________ eye injuries occur in the American Workplace

Eye injuries can be caused by

Eye injuries can be prevented by

Information on eye safety is available by contacting

It is estimated that ______________ percent of eye injuries can be prevented through the use of proper protective eyewear

When verifying that a required workplace hazard assessment has been performed, a written certification identifies

Chipping, grinding, machining, masonry work, wood working, sawing, drilling, chiseling present potential ____________ hazards

Furnace operations, pouring, casting, and welding present potential ______________ hazards

Welding, torch-cutting, brazing, soldering, and laser work present potential _______________ hazards

The majority of impact injuries result from

_________________ are secondary protectors intended to shield the eyes from a variety of impact hazards

____________ are primary protective devices intended to fit the face to protect against impact hazards

To adequately protect workers eyes from impact hazards safety spectacles should always

_____________ may utilize removable side shields and may be plastic or wire screen

______________ surround the eyes and form a protective seal around the eyes preventing objects from entering from the side or underneath

______________ may be worn over corrective spectacles without distributing the adjustment of the spectacles

______________ resists direct passage of large particles into the goggle and prevents fogging by allowing air circulations

______________ prevents fogging by allowing air circulation while it protects against liquid or chemical splash entry

______________ provide eye protection for performing tasks involving intense light; are available with removable lenses and may incorporate prescription lenses

When worn alone __________ do not protect employees from impact hazards

___________ feature both removable and lift front designs and protect against light impact

_____________ may include a plastic or glass insert and protect against some moderate impact

_____________ are primary protectors intended to shield the eyes from a variety of heat hazards

_____________ are secondary protectors intended to protect the entire face, in addition to the eyes, from certain heat hazards

___________ are primary protectors intended to shield the eyes against liquid or chemical splash, irritating mists, vapors and fumes

____________ are secondary protectors intended to protect the entire face against exposure to chemical hazrds

____________ are primary protective devices intended to protect the eyes against a variety of airborne particles and harmful dust

Wearing eye protection with the correct filter shade number protects workers eyes from

The intensity of visible light and radiant energy produced by welding operations varies with

____________ are secondary protectors intended to shield the eyes and face from optical radiation, heat and impact

___________ may include easily removable filter and cover plates which are available in many filter shades

_____________ includes an adjustable feature which allows the user to lift the window and may include easily removable filter and cover plates

_____________ use filter lenses to protect the eyes from optical radiation and include an adjustable strap. They do not provide face protection

The selection of laser protection should depend upon

When training employees who are required to use PPE in the workplace each employee shall be trained to know at least the following

Circumstances when retraining in the use of PPE is required when

Eye and face protection must comply with the standards established by

The scope and purpose of the ANSI Z87.1 is