Quiz For Hand Tools and Final Delivery

This course has expired

This course has expired. Do not complete quiz.

This course has expired. Do not complete quiz.

This course has expired. Do not complete quiz.

This course has expired. Do not complete quiz.

This course has expired. Do not complete quiz.

____________ are generally used to snip off the ends of temples or eyewire screws.

_____________________________ is used for filing down the end of a temple.

The most widely used frame warmer is

When using a __________________ air is directed through a vent onto the part of the frame needing adjustment

Pupillary distance can be measured using a:

1. PD ruler
2. pupilometer
3. distometer
4. polariscope

The center thickness of a lens can be measured using a:

The diopter curve of a spherical lens surface can be measured using:

When beginning the frame selection process it’s best to:

_____________________ is the most used material for plastic frames.

_________________ is a durable plastic material which is injection molded instead of being cut from a sheet.

___________________ is an epoxy material which cannot be over heated or burned.

___________________________ is a strong material, light weight, shape retention unaffected by hot weather.

_____________________________________ is made of special titanium and nickel alloy. Frames have memory so will return to the original shape after being bent or twisted.

_______________________________ holds shape the best of any metal combination.

________________ is a relatively new material very light weight, durable and available is a variety of colors.

Angling the nose pad arms farther apart will result in:

If the patient’s left ear is higher than the right, and the frame is in standard alignment, it can be expected that the frame will fit:

A frame with pantoscopic tilt is fit so that:

A frame with orthoscoopic tilt is fit so that:

In order to decrease the distance between the nose pads of a frame it is necessary to bend the pad arms:

A possible cause leading to one eyewire fitting lower than the other might be:

Most frame shapes will be suitable on a patient with an _________________shaped face:

A relatively narrow frame preferably with a high temple attachment is suitable for a patient with a__________________face.

This course has expired